PIGE-4T-2S-G b/t – 6 port Industrial Gigabit PoE Ethernet Switch

PIGE-4T-2G 4 b/t x Gig PoE Ports, 2 x Fibre ports Front View

Key Features

  • Managed via CLI, Telnet, SSH,Web & SNMP
  • Jumbo frame ( 9.6Kbytes) Support
  • Backplane 24Gbps 
  • IEEE 802.1Q VLAN,
  • Port Mirroring and Isolation
  • IGMP Snooping, DHCP Snooping

Overview

The Case Communications PIGE-4T-2S-G is one of a family of new generation layer 2 managed PoE switches, with 2 x 1Gbps Fibre ports,  4 x10/100/1000 TX-RJ45  x PoE / PoE+  with the option of  PoE++ (60 watts IEEE 802.3bt) ports

PIGE 4T-2S-G – Network Resilience

The PIGE-4T-2S-G  6-Gigabit Port Industrial Switch with PoE switch supports ring  STP, RSTP, MSTP and also supports G.8032 (ERPS)  ring technology with the ability to suppress Broadcast Storms.

PIGE 4T-2S-G –  IEEE 802.3az Energy efficiency

Supporting IEEE 802.3az energy efficient Ethernet Technology the PIGE-4T-2S-G  6-Gigabit Port Industrial Switch with PoE  has excellent green credentials.

High Levels of Security

The PIGE-4T-2S-G  is equipped with high levels of security and quality of service policy, and it  supports VLANS,  port mirroring, and port data rate limiting.

Management

Management of the PIGE-4T-2S-G is via a CLI, Telnet, SSH a Web Interface or SNMP.

Fanless Operation

The 6 Gigabit port Switch operates without fans from -40C to +75C  and operates from a 48vdc power supply.

10KB Jumbo Frames

The PIGE-4T-2S-G Industrial Switch support 10KB jumbo frames

Link Aggregation

To provide greater bandwidth between switches and sites the PIGE-4T-2S-G supports both LACP (Link Aggregation Control Protocol)  and Static Link aggregation.

Hardware Resilience

The use of an IP 40 housing and dual power supply inputs taking in power from 48vdc to 55vdc ensure the PIGE 4T 2S G provides high levels of resilience.

 

Applications

The PIGE 4T 2S G  with its 4 x PoE / POE+ / (‘ bt’ option has POE++ 60 watts watts) Ports is an ideal switch to provide Wi-Fi Access Points, provide access to IP Phones or CCTV devices. Using the embedded security , the users can work with confidence and authorised users can have access to the network and network devices.

 

PIGE-4T-2S-G – Specifications

PIGE-4T-2S-G Industrial Ethernet Switch Specifications
TX / PoE Ports 4 x 10/100/1000TX Ports, with PoE, PoE+, PoE++ (bt option)
PoE StandardIEEE 802.3af, IEEE 802.3at, 802.3bt
Fibre Ports2 x Gigabit SFP Ports
SwitchingLayer 2
Ingress / EgressPort based ingress / egress
Full duplex IEEE 802.3x
Half duplexHalf-duplex back-pressure flow control
Broadcast storm protectionSuppresses unknown multicast and unicast
Ring supportSTP, RSTP, MSTP & ERPS G.8032
Link AggregationLACP (IEEE 802.3ad) and Static
VLANSIEEE 802.1Q 4K VLANs, GVRP, GMRP Q-in-Q
Layer 3 Functions
Virtual VLAN InterfaceSupport for Virtual VLAN Interface
ARPSupport for ARP Checking
RoutingStatic Routing
Access Control ListsBased on source MAC, destination MAC, protocol type, source IP, destination IP, L4 port number, time range management
QoSBased on source IP, Destination IP, Port Number.
Class of ServiceBased on 802.1p
DSCPBased on Differential Services (Design Patter)
DHCPServer / client / relay option 82 / snooping
Scheduling algorithmsSupports SP, WRR, DRR Scheduling
MulticastIGMP Snooping V1 / 2A / 3
LLDPIEEE 802.1ab LLDP
Management
SNMP supportSNMP v1 / V2c / V3
Other ManagementWeb Base, CLI, Telnet, SSL / SSHv2, MIB II
System ManagementAdd or delete systems managers, event logs, status, device reset, save / restore, upgrade management.
LogsUser Login, Operational Status, Event Log
Software UpgradesVia HTTP, with redundant firmware to avoid possible software update failures
Security
Based, IEEE 802.1x, ACL, HTTP, HTTPS, SSL, SSHv2
Denial of Service
Support for CPU Protection
ARP Binding (IP MAC, Port Binding)
Hardware
Energy efficiencyIEEE 802.3az
InstallationDIN Rail, Wall Mount or Shelf
Backplane / packet throughput24 Gbps
Redundant Power Input9vdc to 56Vdc
Overload protectionYes
Power consumptionSwitch 1.25amps at 52vdc
CoolingFanless design
Temperature-40C ~ +75C, 5%~ 90% Non-Condensing
Dimensions145 mm (l)x 210mm (w) x 40mm (w)
Weight0.5Kg with packaging 0.77kg

Downloads and Ordering Information

Configuring ERPS on Case G Series Switches (55 downloads ) How to configure ERPS Ring Protection on Case Communications Industrial Ethernet Switches

Datasheet PIGE-4T-2S-17.1.2020-1.pdf (1120 downloads )

PIGE-4T-2S-G
6 Port Industrial Gigabit Ethernet Switch PoE / PoE+ maximum switch power 65 watts

PIGE-4T-2S-G-bt
6 Port Industrial Gigabit Ethernet Switch PoE++ (60 watts per port) maximum switch  power 250 watts

For more information please contact Case Communications