Industrial Media Converter 100FX to UTP Rj45

IMC-100FX Industrial 100Mbps Media Converter

Overview

Case Communications media converters are Industrial grade converters operating from -40C to +75C, and allowing 1 or 2 Copper ports to operate at rates up to 1Gbps over Fibre. The Fibre ports are provided by SFP’s (Short Form Pluggables) meaning the converters can be used over any kind of fibre and over any distance.

Link Loss Forwarding ensures high availability by disabling both bridged interfaces if one interface fails. Any failure along the signal link is passed through and can be seen by attached devices.

Key Benefits

RJ-45 port support auto MDI/MDI-X function
Auto negotiation speed, half/full duplex
Store-and-forward switching architecture
Built-in link lose forwarding (LLF) and link fault pass-through (LFP) technology
Supports wide operating temperature (-40°C – 75°C)

RJ-45 port support auto MDI/MDI-X function Auto negotiation speed, half/full duplex Store-and-forward switching architecture Built-in link lose forwarding (LLF) and link fault pass-through (LFP) technology Supports wide operating temperature (-40°C – 75°C)

Specifications

HARDWARE
Switch architectureStore and forward
Fibre parametersSC/ST (Multi-mode): 50/125um – 62.5/125um
SC (Single-mode): 9/125um
Avalable distance: 2km (Multi-mode)/30km (Single-mode)
Wavelength: 1310nm (Multi-mode/Single-mode)
Link lose forwardingTX → fibre: If TX port link down, the media converter will force fibre port to link down
Fibre → TX: If fibre port link down, the media converter will force TX port to link down
DIP switchesDIP switch 1:
OFF: Disables port/power alarm
ON: Enables port/power alarm

DIP switch 2:
OFF: Disables LLF (link lose forwarding) and LFP (link fault pass-through)
ON: Enables LLF (link lose forwarding) and LFP (link fault pass-through)

DIP switch 3:
OFF: 100Base-FX full-mode
ON: 100Base-FX half-mode

DIP switch 4:
OFF: Switching mode
ON: Media mode (100TX to 100FX)
ConnectorsFibre: SC/ST (multi-mode, 2km), SC (single-mode, 30km) RJ-45 Socket: CAT-3/5 (10/100Mbps) Twisted pair cable auto MDI/MDI-X and auto-negotiation function support
LEDSPer unit: Power 1 (Green), Power 2 (Green), Fault (Red)
TX: Link/active (Green), 100M (Yellow)
Fiber: Link/active (Green), Full duplex/collision (Yellow)
Reserve polarity protectionPresent
Overload current protectionDC 12~48V, Redundant power with polarity reverse protect function and removable terminal block VAC 18~36V.
Power Consumption2.74 Watts
Power SupplyWide-range redundant power design (12v to 48vdc )
Power polarity reverse protect
Overload current re-settable fuse presentCase/installation
IP-30 protection
DIN rail and wall mount design
Provides EFT protection 3000 VDC for power line
Supports 6000 VDC Ethernet ESD protection
Operating humidity5%~95% (non-condensing)
Operating temperatureStandard: -10°C ~ 60°C
Wide Operating Temperature (-40°C ~ 75°C)
Storage temperature-40°C ~ 85°C
Case DimensionMetal case. IP-30, 30mm (W) x 95mm (D) x 140mm (H)
InstallationDIN rail and wall mount design
EMIFCC Class A, CE EN61000-4-2 (ESD), CE EN61000-4-3 (RS), CE EN-61000-4-4 (EFT), CE EN61000-4-5 (Surge), CE EN61000-4-6 (CS), CE EN61000-4-8, CE EN61000-4-11, CE EN61000-4-12, CE EN61000-6-2, CE EN61000-6-4
SafetyUL, cUL, CE/EN60950-1, Class 1 / Division 2 Stability Testing IEC60068-2-32 (Free fall), IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration)
STANDARDS
Standards ComplienceIEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX/100BASE-FX
IEEE802.3x flow control and back pressure

Ordering Information

Model NumberModel NameDescription
8350-025IMCW-100-SC-MM210/100TX to 100FX (SC, MM 2km) w/
Wide Operating Temperature (-40°C~75°C) Industrial Switch Converter
8350-029IMCW-100-ST-MM210/100TX to 100FX (ST, MM 2km) Industrial Switch Converter
Wide Operating Temperature (-40°C~75°C) Industrial Switch Converter

Additional Information

IMC 100FX Media Converter Data Sheet
For more information please contact Case Communications